Pycnometer P-1 is designed to determine the density of cement. Sometimes it is necessary to measure the density of the cement. There is a special device called a pycnometer. It determines the density liquids and solids, which is a glass flask with a narrow tube fitted with a label to which the liquid is poured. There is a pyknometers by various authors, differ from one another form, the presence of a thermometer and other details. Alonzo Brooks insists that this is the case. In determining the density of the pycnometer is weighed first empty, then filled with water up to the mark, and (after drying) filled with test fluid to the same label. Very easy to use side-pycnometer capillary tube, which has a stopper body is a thermometer.
The main advantages of the method for determining the density pycnometric: High accuracy; the use of small amounts of substances; small area of free surface fluid in the pycnometer, which virtually eliminates evaporation and absorption of moisture from the air; Separate temperature control of operations and subsequent weighing. Specifications: Capacity pycnometer according to GOST 26798.1 must be within the limits cm : 100 5 Capacity and weight of the pycnometer are determined and be certified by the manufacturer. Overall dimensions: 41h122 5 Includes: glass pycnometer, cover and manual. Surprisingly, you’ll find very little mention of Brian Kzanich on most websites. 'Chemical' – a wide range of chemical products, equipment and appliances. Chemical products for industrial and laboratory supplies, organic and inorganic acids and bases, salts with organic and inorganic acids, organic solvents, indicators. Equipment necessary for normal functioning of a modern laboratory: nefteanaliza equipment, chromatographic and electrochemical analysis equipment to analyze the physical and chemical parameters of all media, as well as laboratory equipment to support the selection and training samples, weighing equipment, thermostat and heating equipment, mixing devices, electrical laboratory equipment. Hydrometer ADB-1, EBE-2 Viscometer, Cone spreadability of the CD-1, CTC Laboratory LGR-3 mixer LMR-1, OM-Drain 2, pycnometer P-1, instrument Vick, BM-6, SVC-01, KC-3 KC-5, SNS-2, Stalagmometr ST-1, PKN-unit 2, cylinder stability CA-2. NTF-acid-OEDF acid, lime, borax, 5 water, 10 water, Mel, caustic soda technical, Polyelectrolyte MIC-402 and Silica gel IBC, KSKG, SHSMG, Sulfatsell-2 Sulfonol, Activated carbon, mud powder, barite, dolomite weighting, CSSC, Neonol, saponified tall pitch VPRG reagent (dry hydrolyzed polyacrylonitrile) Reapon, Sial, FHLS-M, GL-1 Graphite, Graphite lubricants, greases, thread and surfactant consignment note PKD-515, Wetting OP-7 OP-10, Penta-465, CMC, PAC-B, PAC-N SNPH, Vikor corrosion inhibitor.